Windows Quick Start Guide
1. If you haven't already done so, download "install.exe" from here.
2. Run install.exe
3. Follow the prompts pressing "next" as appropriate.
4. "Start...", "Programs...", "FastBugTrack...","Alcea Fast BugTrack".
5. A console will appear on your screen. This will show you some sample IP
addresses to try.
6. Open a web-browser, and try some of the suggested addresses from the
console. Looking in the console above, one of the suggested url's is "http://192.168.0.169:10000/" - So we type that into our browser (as shown below - without the quotes).
The defaults on the server configuration page are likely fine. If you
would like to enable email functionality now, you would enter your
SMTP server here. If you don't know what this is or what it means,
you will just leave this blank. You can change this information
once the system is up and running at a later point in time.
7. Create an administrator for your system (Make sure that the "administrator"
radio button is selected). Create any other users you
would like to create.
8. Follow the prompts, pressing "Next Step xyz" as appropriate.
You may leave the remaining project, environment, and area fields blank if
you like. You will be able to modify these once the system is up and
running. However, if you know what you would like to enter here, this would
be a convenient place to enter it.
9. Press "finish".
10. The console will disappear (Fast BugTrack has exited after the configuration
stage).
11. Select "Start...", "Programs...", "FastBugTrack...","Alcea Fast BugTrack"
to restart Fast BugTrack again.
12. Click the "here" link on your "Finished configuration" page, or you can
try and go to one of the URLs suggested in the console (as you did at
step X above).
13. Login and begin using Fast BugTrack.
|
